STORAGE CRITERIA
- Finished clean works of airbags, dried them under sunlight, then coated with french chalk to store
- Airbags are kept in dry place
- Protected airbag from acid, chemicals and fire
PRECAUTIONS
- Control inner pressure of airbag and keep not exceed the maximum working pressure
- Make the carried load contacted surface clean, without sharp objects piercing the airbags
- Avoid twist of airbags
- Inflation test should be proceed for an airbag that with seldom usage till working pressure satisfys.
AIRBAGS REPAIR
- Clean up the airbag part with clean water
- Identified the air leakage area by extending wound part outward 15mm
- Structure layerial segregate by 2-6 layers depends on the size of flake leakage area
- File the flake leakage area by sand paper in single way direction several times to keep clean smooth surface surrounded the facture area
- Ensure there is no unwanted particular embeded and dry up on surface of airbags during whole process
- Using prepared mentioned layer to patch
- Using the rack structure indicated below to carried out vulcanizing processby heating; press the flake leakage area with a given pressure for 50 minutes.
- Inspect the patching area to ensure the tight agglutination. Then inflate the airbags for final check.